Defect Engineering of Titanium Dioxide-Based Photocatalysts for Visible-Light-Driven Degradation of Organic Pollutants

Authors

  • Keely M. Jameson Department of Electrical Engineering and Computer Science, University of Missouri, Columbia, MO, USA. Author
  • Clas Hasan Department of Computer Science, University of Central Florida, Orlando, FL, USA. Author
  • Jurre van Gastel School of Electrical Engineering and Computer Science, Oregon State University, Corvallis, OR, USA. Author

Keywords:

titanium dioxide; defect engineering; oxygen vacancies; visible-light photocatalysis; charge recombination; pollutant degradation

Abstract

Titanium dioxide remains one of the most widely studied photocatalysts for organic pollutant degradation, but its wide band gap confines useful photoexcitation largely to the ultraviolet region. Defect engineering has become the principal route for extending absorption into visible light, yet the field lacks a coherent design logic that connects defect type, concentration, spatial distribution, and stability to degradation performance. This article develops a mechanistically grounded framework for defect-engineered TiO2 photocatalysts under visible-light irradiation. It distinguishes oxygen vacancies, reduced Ti centers, nonmetal dopants, disorder, and interfacial defects according to their optical, charge-transport, adsorption, and reactive-oxygen-species functions. The analysis treats visible absorption as necessary but insufficient: midgap states that improve photon harvesting can also increase nonradiative recombination, and surface defects that promote pollutant adsorption can be unstable under oxidative conditions. A set of analytical relations is used to connect photon-energy thresholds, defect-state absorption, charge separation, reactive oxygen species generation, Langmuir-Hinshelwood degradation kinetics, and multi-objective design constraints. The framework shows why surface-to-bulk defect ratios, defect clustering, facet-dependent defect formation, and operating conditions must be optimized jointly rather than as independent variables. It also clarifies how apparent quantum yield, photon flux, catalyst loading, pH, oxygen availability, and scavenger tests affect comparability across studies. The resulting design perspective supports more defensible defect-engineering strategies for visible-light-driven degradation of organic pollutants and provides criteria for distinguishing genuine photocatalytic gains from absorption-only or adsorption-driven effects.

References

1. Fujishima, A., & Honda, K. (1972). Electrochemical photolysis of water at a semiconductor electrode. Nature, 238(5358), 37–38. https://doi.org/10.1038/238037a0

2. Hoffmann, M. R., Martin, S. T., Choi, W., & Bahnemann, D. W. (1995). Environmental applications of semiconductor photocatalysis. Chemical Reviews, 95(1), 69–96. https://doi.org/10.1021/cr00033a004

3. Schneider, J., Matsuoka, M., Takeuchi, M., Zhang, J., Horiuchi, Y., Anpo, M., & Bahnemann, D. W. (2014). Understanding TiO2 photocatalysis: Mechanisms and materials. Chemical Reviews, 114(19), 9919–9986. https://doi.org/10.1021/cr5001892

4. Chen, X., & Mao, S. S. (2007). Titanium dioxide nanomaterials: Synthesis, properties, modifications, and applications. Chemical Reviews, 107(7), 2891–2959. https://doi.org/10.1021/cr0500535

5. Asahi, R., Morikawa, T., Ohwaki, T., Aoki, K., & Taga, Y. (2001). Visible-light photocatalysis in nitrogen-doped titanium oxides. Science, 293(5528), 269–271. https://doi.org/10.1126/science.1061051

6. Pelaez, M., Nolan, N. T., Pillai, S. C., Seery, M. K., Falaras, P., Kontos, A. G., Dunlop, P. S. M., Hamilton, J. W. J., Byrne, J. A., O'Shea, K. E., Entezari, M. H., & Dionysiou, D. D. (2012). A review on the visible light active titanium dioxide photocatalysts for environmental applications. Applied Catalysis B: Environmental, 125, 331–349. https://doi.org/10.1016/j.apcatb.2012.05.036

7. Pan, X., Yang, M.-Q., Fu, X., Zhang, N., & Xu, Y.-J. (2013). Defective TiO2 with oxygen vacancies: Synthesis, properties and photocatalytic applications. Nanoscale, 5(9), 3601–3614. https://doi.org/10.1039/c3nr00476g

8. Chen, X., Liu, L., Yu, P. Y., & Mao, S. S. (2011). Increasing solar absorption for photocatalysis with black hydrogenated titanium dioxide nanocrystals. Science, 331(6018), 746–750. https://doi.org/10.1126/science.1200448

9. Wang, G., Wang, H., Ling, Y., Tang, Y., Yang, X., Fitzmorris, R. C., Wang, C., Zhang, J. Z., & Li, Y. (2011). Hydrogen-treated TiO2 nanowire arrays for photoelectrochemical water splitting. Nano Letters, 11(7), 3026–3033. https://doi.org/10.1021/nl201766h

10. Etacheri, V., Di Valentin, C., Schneider, J., Bahnemann, D., & Pillai, S. C. (2015). Visible-light activation of TiO2 photocatalysts: Advances in theory and experiments. Journal of Photochemistry and Photobiology C: Photochemistry Reviews, 25, 1–29. https://doi.org/10.1016/j.jphotochemrev.2015.08.003

11. Di Valentin, C., Pacchioni, G., & Selloni, A. (2009). Reduced and n-type doped TiO2: Nature of Ti3+ species. Journal of Physical Chemistry C, 113(48), 20543–20552. https://doi.org/10.1021/jp9061797

12. Gordon, T. R., Cargnello, M., Paik, T., Mangolini, F., Weber, R. T., Fornasiero, P., & Murray, C. B. (2012). Nonaqueous synthesis of TiO2 nanocrystals using TiF4 to engineer morphology, oxygen vacancy concentration, and photocatalytic activity. Journal of the American Chemical Society, 134(15), 6751–6761. https://doi.org/10.1021/ja300823a

13. Liu, G., Yang, H. G., Pan, J., Yang, Y. Q., Lu, G. Q., & Cheng, H. M. (2014). Titanium dioxide crystals with tailored facets. Chemical Reviews, 114(19), 9559–9612. https://doi.org/10.1021/cr400621z

14. Linsebigler, A. L., Lu, G., & Yates, J. T., Jr. (1995). Photocatalysis on TiO2 surfaces: Principles, mechanisms, and selected results. Chemical Reviews, 95(3), 735–758. https://doi.org/10.1021/cr00035a013

15. Henderson, M. A. (2011). A surface science perspective on TiO2 photocatalysis. Surface Science Reports, 66(6–7), 185–297. https://doi.org/10.1016/j.surfrep.2011.01.001

16. Thompson, T. L., & Yates, J. T., Jr. (2006). Surface science studies of the photoactivation of TiO2—New photochemical processes. Chemical Reviews, 106(10), 4428–4453. https://doi.org/10.1021/cr050172k

17. Kumar, S. G., & Devi, L. G. (2011). Review on modified TiO2 photocatalysis under UV/visible light: Selected results and related mechanisms on interfacial charge carrier transfer dynamics. Journal of Physical Chemistry A, 115(46), 13211–13241. https://doi.org/10.1021/jp204364a

18. Zhang, J., Zhou, P., Liu, J., & Yu, J. (2014). New understanding of the difference of photocatalytic activity among anatase, rutile and brookite TiO2. Physical Chemistry Chemical Physics, 16(38), 20382–20386. https://doi.org/10.1039/C4CP02201G

19. Scanlon, D. O., Dunnill, C. W., Buckeridge, J., Shevlin, S. A., Logsdail, A. J., Woodley, S. M., Catlow, C. R. A., Powell, M. J., Palgrave, R. G., Parkin, I. P., Watson, G. W., Keal, T. W., Sherwood, P., Walsh, A., & Sokol, A. A. (2013). Band alignment of rutile and anatase TiO2. Nature Materials, 12(9), 798–801. https://doi.org/10.1038/nmat3697

20. Herrmann, J. M. (1999). Heterogeneous photocatalysis: Fundamentals and applications to the removal of various types of aqueous pollutants. Catalysis Today, 53(1), 115–129. https://doi.org/10.1016/S0920-5861(99)00107-8

21. Nosaka, Y., & Nosaka, A. Y. (2017). Generation and detection of reactive oxygen species in photocatalysis. Chemical Reviews, 117(17), 11302–11336. https://doi.org/10.1021/acs.chemrev.7b00161

22. Kisch, H., & Bahnemann, D. (2015). Best practice in photocatalysis: Comparing rates or apparent quantum yields? Journal of Physical Chemistry Letters, 6(10), 1907–1910. https://doi.org/10.1021/acs.jpclett.5b00521

23. Daghrir, R., Drogui, P., & Robert, D. (2013). Modified TiO2 for environmental photocatalytic applications: A review. Industrial & Engineering Chemistry Research, 52(10), 3581–3599. https://doi.org/10.1021/ie303468t

Downloads

Published

2026-08-24

Issue

Section

Articles