Design and Synthesis of Metal–Organic Frameworks for Selective Carbon Dioxide Adsorption and Separation

Authors

  • Ferdinando Comeriato Department of Electrical Engineering and Computer Science, University of Missouri, Columbia, MO, USA. Author
  • Maxi Conde Department of Computer Science and Engineering, University at Buffalo, Buffalo, NY, USA. Author
  • Puk Jerusalem Department of Computer Science, University of Houston, Houston, TX, USA. Author
  • Isaura Ricart Department of Computer Science, University of North Texas, Denton, TX, USA. Author

Keywords:

metal-organic frameworks; CO2 adsorption; selective gas separation; open metal sites; adsorption selectivity; framework stability

Abstract

Metal–organic frameworks (MOFs) offer exceptional structural and chemical tunability for carbon dioxide adsorption and separation, yet the gap between promising adsorption isotherms and robust process performance remains difficult to close because pore geometry, binding chemistry, framework stability, and regeneration are frequently optimized as separate problems. This manuscript develops an integrated design and synthesis framework for CO2-selective MOFs that connects metal-node and linker selection, open-metal-site engineering, pore confinement, and hydrolytic stability to adsorption thermodynamics and separation metrics. The analysis formalizes dual-site adsorption, isosteric heat, ideal adsorbed solution selectivity, working capacity, diffusion selectivity, and a multi-criteria design objective. It distinguishes coordinative and cooperative CO2 binding from nonspecific physisorption, evaluates trade-offs among capacity, selectivity, heat of adsorption, and regenerability, and identifies synthesis and activation conditions that preserve the intended pore chemistry. The framework also treats water competition, framework hydrolysis, mass-transfer limitations, and process integration with pressure-swing, temperature-swing, and membrane operation. The main contribution is a synthesis-aware, process-relevant scoring logic that can guide candidate selection before extensive experimental campaigns. The analysis indicates that high-performing designs should favor moderate CO2 binding, accessible open metal sites or Lewis basic pockets, pore apertures that discriminate CO2 from N2 or CH4, and hydrolytically robust metal-linker combinations. These criteria provide a technically defensible basis for designing MOFs for post-combustion CO2 capture, natural-gas upgrading, and related separations.

References

1. Furukawa, H., Cordova, K. E., O'Keeffe, M., & Yaghi, O. M. (2013). The chemistry and applications of metal-organic frameworks. Science, 341(6149), 1230444. https://doi.org/10.1126/science.1230444

2. Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T. H., & Long, J. R. (2012). Carbon dioxide capture in metal-organic frameworks. Chemical Reviews, 112(2), 724–781. https://doi.org/10.1021/cr2003272

3. D'Alessandro, D. M., Smit, B., & Long, J. R. (2010). Carbon dioxide capture: Prospects for new materials. Angewandte Chemie International Edition, 49(35), 6058–6082. https://doi.org/10.1002/anie.201000431

4. Li, J. R., Kuppler, R. J., & Zhou, H. C. (2009). Selective gas adsorption and separation in metal-organic frameworks. Chemical Society Reviews, 38(5), 1477–1504. https://doi.org/10.1039/b802426j

5. Britt, D., Furukawa, H., Wang, B., Glover, T. G., & Yaghi, O. M. (2009). Highly efficient separation of carbon dioxide by a metal-organic framework replete with open metal sites. Proceedings of the National Academy of Sciences, 106(49), 20637–20640. https://doi.org/10.1073/pnas.0909718106

6. McDonald, T. M., Mason, J. A., Kong, X., Bloch, E. D., Gygi, D., Dani, A., Crocellà, V., Giordanino, F., Odoh, S. O., Drisdell, W. S., Vlaisavljevich, B., Dzubak, A. L., Poloni, R., Schnell, S. K., Planas, N., Lee, K., Pascal, T., Wan, L. F., Prendergast, D., ... Long, J. R. (2015). Cooperative insertion of CO2 in diamine-appended metal-organic frameworks. Nature, 519(7543), 303–308. https://doi.org/10.1038/nature14327

7. Millward, A. R., & Yaghi, O. M. (2005). Metal-organic frameworks with exceptionally high capacity for storage of carbon dioxide at room temperature. Journal of the American Chemical Society, 127(51), 17998–17999. https://doi.org/10.1021/ja0570032

8. Banerjee, R., Furukawa, H., Britt, D., Knobler, C., O'Keeffe, M., & Yaghi, O. M. (2009). Control of pore size and functionality in isoreticular zeolitic imidazolate frameworks and their carbon dioxide selective capture properties. Journal of the American Chemical Society, 131(11), 3875–3877. https://doi.org/10.1021/ja809459e

9. Burtch, N. C., Jasuja, H., & Walton, K. S. (2014). Water stability and adsorption in metal-organic frameworks. Chemical Reviews, 114(20), 10575–10612. https://doi.org/10.1021/cr5002589

10. Howarth, A. J., Liu, Y., Li, P., Li, Z., Wang, T. C., Hupp, J. T., & Farha, O. K. (2016). Chemical, thermal and mechanical stabilities of metal–organic frameworks. Nature Reviews Materials, 1(3), 15018. https://doi.org/10.1038/natrevmats.2015.18

11. Yang, Q., Liu, D., Zhong, C., & Li, J. R. (2013). Development of computational methodologies for metal–organic frameworks and their application in gas separations. Chemical Reviews, 113(10), 8261–8323. https://doi.org/10.1021/cr400005x

12. Colón, Y. J., & Snurr, R. Q. (2014). High-throughput computational screening of metal–organic frameworks. Chemical Society Reviews, 43(16), 5735–5749. https://doi.org/10.1039/C4CS00070F

13. Myers, A. L., & Prausnitz, J. M. (1965). Thermodynamics of mixed-gas adsorption. AIChE Journal, 11(1), 121–127. https://doi.org/10.1002/aic.690110125

14. Trickett, C. A., Helal, A., Al-Maythalony, B. A., Yamani, Z. H., Cordova, K. E., & Yaghi, O. M. (2017). The chemistry of metal–organic frameworks for CO2 capture, regeneration and conversion. Nature Reviews Materials, 2(8), 17045. https://doi.org/10.1038/natrevmats.2017.45

15. Zhang, Z., Yao, Z. Z., Xiang, S., & Chen, B. (2014). Perspective of microporous metal–organic frameworks for CO2 capture and separation. Energy & Environmental Science, 7(9), 2868–2899. https://doi.org/10.1039/C4EE00143E

16. Bae, T. H., & Long, J. R. (2013). CO2/N2 separations with mixed-matrix membranes containing Mg2(dobdc) nanocrystals. Energy & Environmental Science, 6(12), 3565–3569. https://doi.org/10.1039/C3EE42394H

17. Dubbeldam, D., Calero, S., Ellis, D. E., & Snurr, R. Q. (2016). RASPA: Molecular simulation software for adsorption and diffusion in flexible nanoporous materials. Molecular Simulation, 42(2), 81–101. https://doi.org/10.1080/08927022.2015.1010082

18. Lin, R. B., Xiang, S., Xing, H., Zhou, W., & Chen, B. (2019). Exploration of porous metal–organic frameworks for gas separation and purification. Coordination Chemistry Reviews, 378, 87–103. https://doi.org/10.1016/j.ccr.2017.09.027

19. Keskin, S., & Sholl, D. S. (2009). Efficient methods for screening of metal organic framework membranes for gas separations using atomically detailed models. Langmuir, 25(19), 11786–11795. https://doi.org/10.1021/la901318d

Downloads

Published

2026-04-24

Issue

Section

Articles